Supply | |
---|---|
Connection | terminal block TB3 (1-, 2+; 3-, 4+) |
Nominal voltage | 24 V DC , in consideration of rated voltage of used isolators |
Voltage drop | 0.9 V , voltage drop across the series diode on the termination board must be considered |
Ripple | ? 10 % |
Fusing | 2 A |
Power dissipation | ? 500 mW , without modules |
Reverse polarity protection | yes |
Redundancy | |
Supply | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
Fault indication output | |
Output type | volt-free contact |
Contact loading | 30 V DC , 1 A |
Indicators/settings | |
Display elements | LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED LED Fault (fault indication), green LED |
Directive conformity | |
Electromagnetic compatibility | |
Conformity | |
Electromagnetic compatibility | NE 21:2017 For further information see system description. |
Degree of protection | IEC 60529:2001 |
Ambient conditions | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications | |
Degree of protection | IP20 |
Connection | |
Core cross-section | screw terminals: 0.25 ... 2.5 mm2 (24 ... 12 AWG) |
Material | housing: polycarbonate |
Mass | approx. 450 g |
Dimensions | 15Или отправьте нам запрос наH) , height including module assembly |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas | |
EU-Type Examination Certificate | CESI 06 ATEX 022 |
Non-hazardous area | |
Galvanic isolation | |
Directive conformity | |
International approvals | |
UL approval | |
IECEx approval | |
Accessories | |
Designation | provided accessory: Label Carrier HiALC-HI*TF-SET-1** optional accessories: - HART communication board HiATB01-HART-4X8 - HART multiplexer master HiDMux2700 - HART connection cable HiACA-UNI-FLK34-*M* |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |