Mechanical values and environment | |
---|---|
Design | B |
Material | |
Cable material | PVC |
Housing material | Fiber glass reinforced PPS |
Weight | |
Net | 0,16 kg |
Ambient temperature | -20 ... 60 °C |
Degree of protection | IP67 |
Installation position | Any, pay attention to marking During mounting it is to be ensured the marking arrows on actuator and read head are opposite each other. |
Tightening torque | 0,4 ... 0,5 Nm |
Number of NO contacts | 2 NO contacts with internal fuse 100 mA each |
Connection | Hard-wired encapsulated cable with cable end sleeves 0.34mm2 |
Cable length | 3 m |
Mechanical life | 100 x 106 |
Method of operation | Magnetic, reed contact |
Electrical connection ratings | |
Rated conditional short-circuit current | 100 A Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3.. |
Fusing | |
Power supply / safety contacts, external contact protection | Fuse 10 A gG Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3.. |
Switching voltage | 24 ... 35 V |
Switching current | max.100 mA |
Switching characteristics | Parallel |
Switching voltage according to UL | |
According to UL Class 2 | AC/DCmax.24 V |
Switching frequency, electrical | |
At I_min = 10 mA | max.5 Hz Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3.. |
At nominal current 8 A | max.0,1 Hz Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3.. |
Switching delay from state change | 26 ms Parameter dependent on the evaluation units ESM-BA2.. and ESM-BA3.. |
Miscellaneous | |
in compliance with | EN ISO 13849-1: 2015{} EN 62061: 2005 + AC: 2010 + A1: 2013 + Или отправьте нам запрос на13{} IEC 60947-5-3: 2013 |
Reliability values acc. to EN ISO 13849-1 | |
Monitoring of the safety guard position | |
B10D | 20 x 106 |
in combination withEvaluation unit ESM-BA201, ESM-BA202, ESM-BA203, ESM-BA301, ESM-BA302, ESM-BA303, ESM-BA201P, ESM-BA301PandActuator CMS-M-BH | |
Center offset | |
At s=3 mm read distance | 2,5 mm Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator. |
Assured switch-off distance Sar | max.20 mm The assured switch-off distance s_ar corresponds to the reset distance. |
Assured operating distance Sao | |
With center offset m=0 | min.7 mm Figure only applies if there is no ferromagnetic material in the vicinity of the read head and the actuator. |
8 (029) 555-8-000 | |
8 (044 |